DTP CrossPoint 84 Series Matrix Switchers • Operation 48
Worksheet Example 1: System Equipment
Figure 29 shows a portion of a worksheet for a DTP CrossPoint 84 in a fictional organization
with the system hardware annotated. Inputs 6 and 8 have no connection in this
organization, so they are crossed out on the worksheet. Similarly, output 2 is crossed out.
1 2345678
1234
Input sources
Output destinations
Preset # Title: Video: Audio:
Fill in the preset number and use colors, dashes, etc., to make connecting lines.
Indicate if the configuration is for video, audio, or both.
VTG 400/
Audio
System
PC 2PC 1
Weekly status mtg 3
Camera
#2
Camera/
mic - Main
podium
Classroom
FP #1
Podium
monitor
DTP R
HDMI
330/
Audio
System
DTP T
USW 333
Figure 29. Worksheet Example 1: System Equipment
Inputs include cameras, PCs, an Extron VTG 400DVI, an audio system, and digital and
analog inputs to an Extron DTP T USW 333 switcher. Output devices include monitors,
projectors, a stereo, a VCR for recording presentations, and a DA.
The VTG 400DVI video test generator connected to input 5 enables a video test pattern
to be sent to one, several, or all output devices for problem isolation or adjustment
purposes. An audio test tape or CD can be used in a similar manner to check out the audio
components.
29
To Next Page
Loading...
