Extron electronics DTP CrossPoint 84 - Inputs and Outputs Buttons

DTP CrossPoint 84 Series Matrix Switchers • Operation 23
Inputs and Outputs Buttons
NOTE: See Front Panel Operations starting on page28 for detailed descriptions of
the following operations.
Primary functions
Action Select Input or Output for tie being created.
Indication Blink: potential tie/untie.
Lit: current tie
Amber: video and audio tie
Green: video only tie
Red: audio only tie
1 2 3 4
through
7 8
Secondary functions
Presets Action
Select a preset in Preset mode.
Indication Lit: A preset has been saved to this location.
Output
mutes
Action
Outputs: Press and hold to mute or unmute the output.
Indication
Outputs blink: Output is muted.
Input audio
configuration
Action 1
Input 2 and
Output 2 blink:
Select config mode.
Action 2
Inputs: Select the input to configure.
Indication
Inputs: Indicate setting.
Control
insert
configuration
Action 1
Input 4 and
Output 4 blink:
Select config mode.
Action 2
Output 3 and Output 4:
Select the output to configure.
Input 7 and
Input 8:
Select the input to
configure.
Indication
Inputs and Outputs:
Indicate setting.
Background
Illumination
Action
Input 1 and Input 2:
Toggle between background
illumination or buttons unlit.