Extron electronics DTP CrossPoint 84 - Setting the Input and Output Gain Structure

DTP CrossPoint 84 Series Matrix Switchers • Matrix Software 118
Signal Path Building Blocks
All of the inputs and outputs that have name blocks (
in figure64
) are discrete
signal paths:
Visible in figure 64 Not visible in figure 64
• Line in • Virtual returns in
• Mic in • Expansion bus in
• Output
The input and output processor chains on these paths can be individually loaded with
pre-configured modular templates called building blocks. These modules are designed for
specific microphones, source devices, or speaker destinations, and can streamline the initial
configuration. The modules are configurable and are more versatile than a global template.
The modular building blocks can be loaded to a selected input or output by a clicking on the
signal path label bringing up the building block dialog box.
Different menus or dialogs are available according to the selected signal path.
The building blocks can be renamed and processor blocks further customized according to
the requirements of the system.
*
* This output 1 amplifier block is not present on non-IPCP models.
Figure 64. Building Blocks Availability
60