Extron electronics DTP CrossPoint 84 - Performing Soft System Resets (Resets 4 and 5); Troubleshooting; Configuration Worksheets

DTP CrossPoint 84 Series Matrix Switchers • Operation 39
4. Mute outputs: One at a time:
a. Press and hold the Output 1 button until the button begins to blink (approximately
2 seconds).
b.
Pr
ess and hold the Output 3 button
until the button begins to blink (approximately
2 seconds).
1
3
1
3
The button blinks indicate
that the output is muted.
The button blinks indicate
that the output is muted.
Mute outputs one at a time.
2 seconds
2 seconds
Press and hold the Output 1 button.
Press and hold the Output 3 button.
Green = Video is muted.
Red = HDMI audio is muted.
Amber = Video and HDMI audio are muted. (Amber is visible only
after you have selected the Video and Audio buttons).
NOTE: Video and audio are muted
in this example.
NOTES:
• If both video and audio are selected, the mute action toggles both the
video and HDMI audio outputs. If either the video output or the HDMI audio
output is already muted, the unmuted output is muted and the muted
output is unmuted.
• If both video and audio are selected and only video is muted, the output
button blinks between green and amber. If only audio is selected, the
output button blinks between red and amber.
5. Unmute outputs: One at a time:
a. Press and hold the Output 1 button until the button returns to its previous state
(approximately 2 seconds). The output 1 video and audio signals are unmuted.
a. Press and hold the Output 3 button until the button returns to its previous state
(approximately 2 seconds). The output 3 video and audio signals are unmuted.
1
3
1
3
Unmute outputs one at a time.
2 seconds
2 seconds
Press and hold the Output 1 button.
Press and hold the Output 3 button.
The button returns to its previous indication
(either lit, background illuminated, or unlit)
to indicate that the output is unmuted.
The button returns to its previous indication
(either lit, background illuminated, or unlit)
to indicate that the output is unmuted.
NOTE: If both video and audio are selected, the unmute action toggles both the
video and HDMI audio outputs. If either the video output or the audio output
is already unmuted, the muted output is unmuted and the unmuted output is
muted.
6. Exit View-only mode: Press and release the View button.
All input buttons and output buttons
return to unlit or background illumination.
VIEW
Press the button.
The View button returns to unlit or background illumination.