Extron electronics DTP CrossPoint 4K Series - Using the Button Label Generator Software

DTP CrossPoint 4K Series Matrix Switchers • Reference Information 172
Using the Button Label Generator software
Start the Button Label Generator program by clicking the desktop icon or as follows:
1. Click Start > All Programs > Extron Electronics > Button Label Generator
> Button Label Generator. The Button Label Generator window opens (see
figure 92).
Figure 92. Extron Button Label Generator Window
2. In the Systems drop-down menu (figure 92,
1
), choose the MATRIX SWITCHERS 1616
option to match, as closely as possible, the button label size and input and output
matrix size for your DTP CrossPoint 4K Series switcher.
3. Using normal Windows controls, you can create and print labels that can be placed in
the label windows on the front panel of the switcher.
NOTE: For best results, print on transparent or translucent material.
4. Click the Clear All Buttons button (
2
) and create new labels (see step 3) as many
times as necessary to make all of the button labels that you need.
To access the help program, click the Help menu (
3
).