DTP CrossPoint 4K Series Matrix Switchers • Matrix Software 132
DSP Configurator Mode buttons
Allows you to select between Live mode and Emulate mode (see
Emulate mode vs. Live mode on page 126, for more information).
Keyboard Navigation
The DSP Configurator program is fully navigable using the computer keyboard. Some
keyboard navigation behavior matches Windows standards, while other behaviors are
specific to the DSP Configurator program.
When the program is started, the cursor focus is in the upper left corner of the program
audio input (line signal processor chain [see figure 73,
A
]). The Input 1 Gain block is
highlighted green ( ).
*
ECBAD
* This output 1 amplifier block is not present on non-IPCP models.
Figure 73. DSP Configurator Program Window
To Next Page
Loading...
