Extron electronics 100 - Figure 5-2. Control Program Example; Figure 5-3. Configured Matrix Example

Extron • Matrix 100 • User’s Manual
Chapter 5• Windows® Control Software
Figure 5-2. Control Program Example
Drag an Input box to an Output box to make a “Tie” or connection.
Clicking on an Input or an Output box will open an appropriate dialog box with a
choice of icons for either Input Devices or Output Devices. Click on the desired
icon to assign it to the selected Input or Output. A Text Box at the bottom,
marked “Caption”, allows the user to type in a name for that device. Click “Ok”
to close the dialog box.
Below is an example of a Matrix Control Program Window complete with
assigned Icons, Captions and Ties, or connections.
Figure 5-3. Configured Matrix Example
5-2