Extron • Matrix 100 • User’s Manual
Chapter 2 • Rear Panel Connections
Composite Video Connections
NTSC and PAL are television or VCR type signals on a single coax cable, which
may or may not have stereo audio. For this application, the Matrix 100 uses one
Composite Video module, shown in Figure 2-6 in the right-most position.
Connect the output of an NTSC/PAL video source to a Video module input. (See
illustration below.) Connect the video output from the Matrix to a destination
device that uses Composite Video.
________ NTSC - National Television Standards Committee
PAL - Phase Alternation Line
Figure 2-6. Composite Video with Right & Left Audio
_______ Audio Connections may or may not be used. See page 2-9 for wiring.
2-6
12
3
43
To Next Page
Loading...
