USER MANUAL
H.264 REAL TIME DVR
44
Notice
The tour which is working will be stop after the setting is
changed.
Setting a new preset position
1. Move camera position using direction button ⑤.
2. Select the preset number to set using button ⑨.
3. Click button ⑪ “SET”.
4. Repeat process 1 ~ 3 stage to set another preset position.
※ Preset numbers are available up to 10.
※ The maximum preset number is different according to the specification of camera.
Moving camera to preset position
1. Select the preset number to move using button ⑨.
2. Click button ⑩ “GO”.
※ Moving camera to preset position is only available when the camera supports
preset feature.
Deleting preset position
1. Select the preset number to delete using preset number button ⑨.
2. Click button ⑫ “CLEAR”.
※ Deleting preset position is only available when the camera supports.
Starting touring
1. Click button ⑬ “START”.
2. Then it will start traversing each preset position one by one automatically.
Stopping touring
1. Click button ⑭ “STOP”.
2. Then it will stop traversing.
To Next Page
