9
Installation (Optional)
1 Install the Micro SD Card (Optional)
1. Remove the cover on the camera.
2. Insert the micro SD card (sold separately) into the card slot as shown in
the gure below.
3. Place the cover back on.
After installing the micro SD card, you should initialize the card in the
EZVIZ app before using it.
This Side Up
4. In the EZVIZ app, tap the Storage Status in the Device Settings interface
to check the SD card status.
5. If the memory card status displays as Uninitialized, tap to initialize it.
The status will then change to Normal and it can store videos.
To Next Page
Loading...
