Ezviz C3X User Manual

7
How to Set Your PoE Camera?
Option 1: Connect your PoE camera to a PoE Switch/NVR.
Steps:
1. Connect the Ethernet cable to the PoE port of your camera.
2. Connect the other end of the Ethernet cable to the PoE port of your PoE
switch or NVR.
3. Connect the LAN port of your PoE switch or NVR to the LAN port of a
router via the Ethernat cable.
Router
For PoE Port
For LAN Port
For LAN Port
PoE Switch/NVR
The PoE switch, NVR and Ethernet cable are not included in the package.
4. Log in to your account using the EZVIZ app.
5. On the Home screen, tap “+” on the upper-right corner to go to the Scan
QR Code interface.
6. Scan the QR code on the Quick Start Guide cover or on the body of the
camera.
7. Follow the wizard to add the camera to the EZVIZ app.

Ezviz C3X Specifications

General

Type	IP security camera
Day/night mode	Yes
Placement supported	Indoor & outdoor
Connectivity technology	-
Form factor	Dome
Mounting type	Ceiling/wall
Product color	White
International Protection (IP) code	IP67
Minimum illumination	- lx
Number of lenses	2
Total megapixels	- MP
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Video formats supported	H.265
Supported graphics resolutions	1920 x 1080 (HD 1080)
Number of cameras	1