Ezviz T2C - Preparations; Detach Cover; Remove Insulation Strip

2
EZVIZ App
Ifyouhavealreadyusedtheapp,pleasemakesurethatitisthelatestversion.Tond
out if an update is available, go to the app store and search for "EZVIZ".
Preparations
1� Detach Cover
Detach the cover of the sensor at the detaching groove.
Detaching
Groove
Cover
2� Remove Insulation Strip
Removethebatteryinsulationstripasinstructedinthegurebelow.
Insulation Strip
Battery
• Whenthebatterylevelislow,thelowbatterynoticationwillbepushedtothe
EZVIZ app to remind you to replace batteries.
• If you need to replace batteries, please purchase two CR1632 batteries.
• When replacing batteries, please insert with the positive side facing up.
• Keep your hands dry and clean when touching the circuit board.