Ezviz T2C - Operations on the EZVIZ App; Homepage; Settings

5
Operations on the EZVIZ App
The app interface may be different due to version update, and the interface of the app you
installed on your phone shall prevail.
1� Homepage
Launch the EZVIZ app, open the homepage of the related gateway, you can manage
your detector as needed on the page.
Log Detection log of the detector.
Dismiss Clear alarms of the detector.
2� Settings
Parameter Description
Device Name Customize the name of your device.
Alarm Settings When enabled, a warning will be issued if the door contact
is triggered.
Youcansetthenoticationparametersasneeded.
Linkage Camera Select your camera to connect to the detector. Once
connected, the camera will turn to the place when the
detector is opened or closed.
Related Devices You can see the gateway connected to your detector.
Device Information You can see the device information here.
Share Share your device.
Delete Device Tap to delete the detector from EZVIZ cloud.