What to do if FAAC 400 model doesn't have hydraulic locking?
If your FAAC Gate Opener model lacks hydraulic locking, you'll need to install electric locks. This ensures the gate leaf is mechanically locked, providing necessary security.
General| Brand | FAAC |
|---|---|
| Model | 400 |
| Category | Gate Opener |
| Language | English |
Guidelines on gate construction, installation, and proper usage for safety.
Detailed description and technical specifications for the 750 operator.
Ensuring gate criteria before installation.
Instructions and guidance for digging foundation and installing the drive unit.
Placement and mounting instructions for the hydraulic control unit box.
Steps for connecting the hydraulic lines between the drive and control units.
Procedure for removing air from the hydraulic system for proper operation.
Instructions for installing the gate leaf shoe.
How to adjust bypass valves for anti-crushing and reliable gate movement.
Overview of the 455D control board for FAAC High Voltage swing gate operators.
Input voltage, power, motor load, temperature, and protection fuses.
Function logics, timing parameters, and force adjustments for the control board.
Wiring terminals for motors (M1, M2) and the warning lamp output.
Connecting external devices like push-buttons, detectors, and stop contacts.
Connecting photocells and edge sensors for entrapment protection.
Wiring requirements for monitored safety devices for UL325 compliance.
Brief descriptions of main operating logics: Semi-automatic, Automatic, Security.
Accessing and setting basic functions like logic, pause time, and force.
Setting torque, stroke, delays, and other advanced parameters.
Understanding LED indicators to monitor input and status signals.
Verifying gate movement direction and adjusting motor force.
Procedure for simple or complete learning of gate operating times.
Performing final system tests and verifying monitored safety devices.
Detailed descriptions of operating modes (E, A, S, EP, AP, SP, B, C).
Features of the prewired enclosure for easy board installation and wiring.
Guidelines for safe and compliant AC power wiring and grounding.
Connecting safety photocells to dedicated terminals for monitoring.
Wiring diagram for connecting a relay to drive a Maglock.
Wiring for implementing shadow loop functionality with relay and loop detector.
To Next Page
