Need help?Do you have a question about the FAAC 412 Compact and is the answer not in the manual?
General| Brand | FAAC |
|---|---|
| Model | 412 Compact |
| Category | Gate Opener |
| Language | English |
Essential safety rules and warnings for installers to prevent accidents and damage.
Overview of the 412 Compact system and detailed technical specifications for operator and control unit.
Diagram and description of the typical installation setup for the automation system.
Checks required before starting the installation to ensure proper gate and system readiness.
Step-by-step instructions for mounting the electromechanical operators onto the gate post and leaf.
Recommended dimensions for gate leaf and post configuration for optimal operator performance.
Guidelines for calculating and adjusting installation dimensions based on gate specifics and clearance needs.
Details of the 410 MPS control unit, terminal blocks, and electrical connection diagram for accessories.
Configuration of the automation system's operating logic and functions using programming microswitches.
Explanation of the four available operating logics (Automatic, Safety, Semi-Automatic) and their functions.
Setting the operating mode for closing safety devices to control gate behavior upon activation.
Procedure to check and set the correct direction of rotation for the gate operators.
How to adjust opening and closing times using the OP/CL trimmer on the control unit.
Adjusting the delay for the second leaf closing in overlapping gate configurations.
Adjusting the temporary pause time between opening and closing cycles for automatic logics.
Adjusting the torque sensitivity of the anti-crushing safety system via the TORQUE trimmer.
Steps for final checks, safety label application, and customer handover after installation.
Introduction to the 412 Compact system for end-users, covering basic operation.
Essential safety rules for end-users to follow during operation and interaction with the automated gate.
A brief description of the 412 Compact automation system's components and function.
Instructions for end-users on how to manually operate the gate in case of power failure.
Steps for the end-user to restore the gate to automatic operation after manual release.
To Next Page
