Why FAAC Gate Opener gate not moving?
If your FAAC Gate Opener isn't moving, several factors could be at play. Here's what to check: * Ensure mains power is supplied to the unit. * Verify that the operator is not unlocked. * Examine the anti-crushing system adjustment. * Check the oil level inside the tank. * Confirm the connection and operation of the thrust capacitor. * Assess the efficiency of the electronic control unit.
What to do if FAAC Gate Opener leaves stop at slow-down?
If the leaves of your FAAC Gate Opener stop at slow-down, check the adjustment of the anti-crushing system.
Why FAAC 402 operator is losing oil from the breather screw?
An initial, minimum oil leak from the breather screw of your FAAC Gate Opener is normal. However, a larger leak may occur if the operator is not fitted in a perfectly horizontal plane. If the oil leak does not stop soon, we advise you to visit an authorised repair centre.
How to fix FAAC 402 Gate Opener gate moving jogwise?
If your FAAC Gate Opener is moving jogwise: * Make sure that you have removed the breather screw. * Run some complete gate opening and closing cycles, in order to release any air inside the piston.
General| Motor Rotation Speed | 1400 rpm |
|---|---|
| Rod Stroke | 300 mm |
| Power Supply | 230V AC |
| Operating Temperature | -20°C ÷ +55°C |
| Usage Frequency | Intensive use |
General safety guidelines and precautions for gate operator installation and usage.
Classification standards for gate operators according to UL325.
Instructions for properly placing warning signs on the gate.
Details on the operator's physical characteristics and technical data.
Provides physical dimensions of the 402 operator unit.
Diagram and notes for electrical connections of the 402 operator.
Comprehensive guide for installing the 402 operator.
Checks required before starting the gate operator installation.
Specific dimensions required for gate and column during installation.
General guidelines to follow for correct gate operator installation.
Step-by-step process for mounting the 402 operator.
Procedure for adjusting the anti-crushing safety device.
Instructions for operating the gate manually.
Guidelines for routine checks and upkeep of the operator.
Overview of the 455D control board and its capabilities.
Key technical specifications for the 455D control board.
List of features and programmable options for the control board.
Diagram identifying the components and terminals on the control board.
Detailed wiring diagrams and terminal explanations.
Instructions for connecting safety devices like photocells.
Parameters and functions available in advanced programming mode.
Description of different operational logic modes for the gate.
Guide to accessing and configuring the control board settings.
Instructions for basic programming functions.
Detailed steps for advanced programming of the control board.
Procedure for initial start-up and checking LED indicators.
Process for learning and setting gate operating times.
Steps for performing final system checks after programming.
Detailed explanation of various operating modes.
Guidelines for safe and compliant AC power wiring.
Instructions for connecting monitored safety photocells.
Wiring instructions for connecting a Maglock accessory.
Instructions for installing the Shadow Loop kit.
To Next Page
