To Next PageTo Next Page
Need help?Do you have a question about the FAAC 402 Operator and is the answer not in the manual?
General| Brand | FAAC |
|---|---|
| Model | 402 Operator |
| Category | Gate Opener |
| Language | English |
Details specifications and physical characteristics of the 402 operator unit.
Information about the 450 MPS control panel used with the 402 operator.
Details on determining the voltage requirement and operating logic for the 450 MPS control panel.
Describes the 402 Compact Operator's capabilities, hydraulic system, and recommended usage.
Explains the different operating logic modes available for the 450 MPS control panel.
Steps to prepare the gate for operator installation, ensuring it is plumb and moves smoothly.
Instructions on how to use the manual release key to disengage the operator's hydraulic system.
Outlines the steps involved in physically mounting the 402 operator to the gate.
Guidance on using junction boxes for connecting operators to the control panel based on distance.
Procedure to verify the correct rotation direction of the operator motors.
Details the 30 VDC output for accessories and its maximum load capacity.
Explains the use of normally closed (N.C.) reversing devices like photobeams and inductive loops.
Information on using normally open (N.O.) contacts for gate activation devices.
Explains the function of the five LEDs on the control panel for diagnostic purposes.
Instructions for connecting an electric lock and its interaction with the reversing stroke.
Guide to setting the DIP switches for various operating logic modes.
How to set DIP switch 4 to control reversing device behavior during closing.
Explanation of DIP switch 5 for activating a reversing stroke, often needed for electric locks.
Instructions for adjusting torque, pause time, opening/closing time, and leaf delay using potentiometers.
Recommended maintenance schedule and tasks for the 402 operator unit.
Basic maintenance advice for keeping the control panel clear of debris.
Solutions for issues where the gate fails to open to its full extent.
Troubleshooting steps for when the gate opens but fails to close properly.
Addresses problems related to the gate opener not responding to radio control commands.
