FAAC 412 - Page 13

Page 13
January, 2004
412 Operator And
455 D Control Panel Installation Manual
Parts List
412 Compact Operator
POS PART NO. DESCRIPTION QTY
1 799360 Motor Housing, SX top section 1
1 799359 Motor Housing DX top section 1
2 713009 Manual Release Key, 412 1
3 7171345 Flange, Protective Cover, 412 SX 1
3 7171335 Flange, Protective Cover, 412 DX 1
4 N/A Nickel Plated Self Tapping Screw (3.5 x 13 mm) 1
5 N/A Self Tapping Screw (5.5 x 15 mm) 2
6 799358 Cylinder Collar 1
7
736060* Cylinder Assembly New (Slide On)*
1
8 727148 End Cap, Protective Cover SX 1
8 727147 End Cap, Protective Cover DX 1
9 N/A Nickel Plated Self Tapping Screw (3.5 x 9.5 mm) 3
10 2705 Capacitor For 115 v (25μf) 1
10 2707 Capacitor For 220 v (8μf) 1
11 727216 Protective Cover, 412 1
12 722298 Protective Cover Support, 412 1
13 N/A Self Tapping Screw (5 x 18 mm) 4
14 716074 Motor Housing, Bottom Section 1
15 746030 Stator (motor) for 220 v 1
15 746755 Stator (motor) for 115 v 1
16 746028 Rotor (motor) 1
17 710919 Strain Relief, 412 1
18 390009 Skin Pack, 412 (1 pack = 2 operators) 1
*Models Manufactured before 2000 used a screw in type cylinder assembly. The part
number for this type cylinder is 736039. The manufacture date is the NR number on
the sticker located on the top motor housing.