FAAC 550 ITT - Page 9

ENGLISH
13
ADVANCED PROGRAMMING
Display
Function
Default
PRE-FLASHING of flashing lamp:
Can be adjusted from to sec. in one second steps.
LIMIT-SWITCH INTERVENTION MODE:
For setting motor operation when limit-switches (optionals) are reached:
=FCA/FCC: Stops immediately
=FCA/FCC: Stops after 3 sec. deceleration
=FCA: Stops immediately
FCC: Stops after 3 sec. at full speed
=FCA: Stops after 3 sec. deceleration
FCC: Stops after 2 sec. deceleration +1 sec. closing thrust
SAFETY DEVICES INTERVENTION MODE:
For setting motor operation when safety devices are engaged
= FSWOP stops opening movement which, on release, resumes opening. FSWCL reverses
closing movement.
= When up-and-over door is closed, open or locked and FSWCL are engaged, the Open
pulse activates the flashing lamp and movement begins only when FSWCL
(1)
(ADMAP
function) disengages. During the movement, FSWOP reverses, and FSWCL stops and reverses
on release
(1)
.
= FSWOP reverses the opening movement, FSWCL reverses closing movement.
(1)
With pre-flashing selected, movement begins after pre-flashing time.
To exit programming and return to display of inputs status
SESLUP
SUTATSROOD NEPO SECIVEDYTEFASGNISOLC SECIVEDYTEFASGNINEPO
DESOLC
esuapretfasesolcdnasnepo
emit
)1(
tceffeon
)noitcnufdAgnidulcxe(
tceffeon
)gninepostibihni(
ESUAPNINEPO emitesuapstnuoc-er
tceffeon
)gnisolcstibihni(
tceffeon
GNISOLC noitomsesrevernoitomsesrevertceffeon
GNINEPO tceffeontceffeongnimmargorPees
DEPPOTS sesolc
)1(
tceffeon
)gnisolcstibihni(
tceffeon
SESLUP
SUTATSROOD NEPO SECIVEDYTEFASGNISOLC SECIVEDYTEFASGNINEPO
DESOLC snepo
)1(
tceffeon
)noitcnufdAgnidulcxe(
tceffeon
)gninepostibihni(
ESUAPNINEPO sesolc
)1(
tceffeon
)noitcnufdAgnidulcxe(
tceffeon
GNISOLC noitomsesrevernoitomsesrevertceffeon
GNINEPO spotstceffeongnimmargorPees
DEPPOTS sesolc
)1(
tceffeon
)gnisolcstibihni(
tceffeon
TAB.2 LOGIC A (Automatic)
TAB.3 LOGIC E (Semi-automatic)
(1)
With pre-flashing selected, movement begins after pre-flashing time.