14
ENGLISH
2A-1 PREPARING THE LEAVES – Alternative method to fit heavy leaves
Prepare the leaves as described below:
Disassemble the carriage by withdrawing the upper and lower plate of the carriage fig.20 ref.
and removing the 2 fastening screws M6 fig.20 ref.
.
Then, fit the upper plate of the carriage on the sliding profile fig 21 ref.
and fit the lower plate of the
carriage in the leaf fitting profile fig 21 ref.
. Then secure using the bolts fig 21 ref.
.
fig.20
fig.21
To Next Page
Loading...
