Need help?Do you have a question about the FAAC 950 N and is the answer not in the manual?
General| Max Leaf Weight | 950 kg |
|---|---|
| Hold Open Time | Adjustable |
| Max Thrust | 1000 N |
| Type | Electromechanical |
| Power Supply | 230V AC, 50/60Hz |
| Operating Temperature | -20 °C to +50 °C |
Provides essential safety guidelines and warnings for those installing the product.
Outlines mandatory safety practices and adherence to standards for system installation and use.
Specifies the maximum angles for door opening with different installation types and doorpost depths.
Details limits for leaf weight and length based on arm type and door length.
Specifies the maximum allowable depth of the doorpost for system installation.
Instructions for securely mounting the operator unit to the door structure.
Guidance on attaching and adjusting the articulated or sliding transmission arms.
Details the inputs for various commands to the 950 I/O board, including safety and control signals.
Explains the connection of safety devices like photocells and stop sensors to the 950 I/O board.
Describes the output connections for controlling an electric lock from the 950 I/O board.
Details the output configuration for an electromagnet command on the 950 I/O board.
Explains how to connect outputs for door open/closed status signals from the 950 I/O board.
Describes the output connection for indicating a board fault condition from the 950 I/O board.
Details the output connections for a card reader status on the 950 I/O board.
Explains the different operational modes (Open, Automatic, Manual, Night) selectable via the unit's switch.
Instructions for mode selection and manual operation using accessory controllers.
Step-by-step guide for performing the initial system setup and configuration after installation.
Instructions for assembling the plastic cover onto the operator unit.
Instructions for assembling the aluminium cover onto the operator unit.
Procedure for manually operating the door in case of power cut or system malfunction.
Guidance on using the unit's selector switch to choose operating modes.
Instructions for mode selection and manual operation using accessory controllers.
Description of the 'Open' mode where the door remains open after activation.
Description of the 'Automatic' mode for opening and closing cycles after a pause.
Details the 'Manual' and 'Night' modes, controlling door operation and command accessibility.
To Next Page
