Need help?Do you have a question about the FAAC D064 and is the answer not in the manual?
Lists technical specs like voltage, power, temperature, and logic.
Identifies main components of the control board with J and LED labels.
Details connections for command devices, safety devices, and power.
Explains the function of dip-switches for configuration.
Describes automatic and semi-automatic operating logic behaviours.
Explains the meaning of status LEDs for inputs like OPEN, STOP, FSW.
Instructs to set the unit using Dip-Switch DS1 for desired operation.
Details the procedure for the learning cycle to define door parameters.
Step-by-step guide for manual learning in semi-automatic mode.
Details automatic learning procedure for automatic logic.
Step-by-step guide for manual learning in automatic mode.
Explains manually setting the stop contact point during learning.
Describes enabling/disabling the pre-flashing function for the courtesy light.
Instructions for memory storing RC/LC radio controls for OPEN A/B.
How to store remote radio controls without RADIO SETUP buttons.
Procedure to delete all stored radio control codes.
Essential safety guidelines for installers and users.
Lists technical specs like voltage, power, temperature, and logic.
Identifies main components of the control board with J and LED labels.
Details connections for command devices, safety devices, and power.
Explains the function of dip-switches for configuration.
Describes automatic and semi-automatic operating logic behaviours.
Explains the meaning of status LEDs for inputs like OPEN, STOP, FSW.
Instructs to set the unit using Dip-Switch DS1 for desired operation.
Details the procedure for the learning cycle to define door parameters.
Step-by-step guide for manual learning in semi-automatic mode.
Details automatic learning procedure for automatic logic.
Step-by-step guide for manual learning in automatic mode.
Explains manually setting the stop contact point during learning.
Describes enabling/disabling the pre-flashing function for the courtesy light.
Instructions for memory storing RC/LC radio controls for OPEN A/B.
How to store remote radio controls without RADIO SETUP buttons.
Procedure to delete all stored radio control codes.
Essential safety guidelines for installers and users.
General| Max Thrust | 600 N |
|---|---|
| Motor Voltage | 24 Vdc |
| Power Supply Voltage | 230 V AC |
| Operating Temperature | -20°C to +55°C |
| Speed | 12 m/min |
To Next Page
