FAAC D1000 User Manual

D1000
D1000

FAAC D1000 Specifications

General

Brand	FAAC
Model	D1000
Category	Garage Door Opener
Language	English

Summary

General Safety Instructions for Installation and Maintenance

CE Declaration of Conformity for Machines

Warnings for the Installer

Important safety obligations and precautions for installers of the automated system.

Automated System D1000

2. Technical Specifications

Lists key technical specifications for the D1000 automated system, including power, force, and speed.

4. Description

5. Preliminary Checks

6. Assembly

7. Installation

7.1. Sliding Guide

7.2. On-Door Fitting

7.3. Operator

Steps for installing the operator unit onto the rear fitting of the sliding guide.

8. E1000 Control Board

8.1. Technical Specifications

8.4. DS1 Programming Dip-Switches

Explains the functions of the DS1 dip-switches for board configuration.

8.5. Operating Logics

Describes the automatic and semi-automatic operating logic tables for the system.

10. Connections

11. Programming

11.1. Setting the Board

Setting the board using dip-switches and adjusting potentiometers for force.

11.2. Learning (Set Up)

Procedure for setting operating parameters, stop points, and logic via learning cycle.

Automatic Learning with Logic "A" (Automatic)

Step-by-step guide for automatic learning in Logic A.

Manual Learning with Logic "A" (Automatic)

Step-by-step guide for manual learning in Logic A.

Learning with Thrust Force of 1000N

On Ground Manual Setting of Stop Contact Point

12. Memory Storage of Radio Controls Coding

12.1. Memory Storage of Radio Controls DS

Procedure to store DS type radio control codes for OPEN A and OPEN B channels.

12.2. Memory Storage of Radio Controls SLH

12.3. Memory Storage of Radio Controls LC (for some markets only)

12.4. Radio Controls Deletion Procedure

13. Start-Up

15. Maintenance

17. Accessories

18. Troubleshooting