Need help?Do you have a question about the FAAC 746 C and is the answer not in the manual?
General| Max Gate Weight | 600 kg |
|---|---|
| Operating Temperature | -20°C to +55°C |
| Usage | Residential |
| Power Supply | 230 V AC |
| Pinion Module | 4 mm |
| Safety Features | Obstacle detection, photocells |
| Control Options | Remote control, key switch |
Essential safety guidelines for installation personnel, covering risks and precautions.
Explanation of standard icons and symbols used throughout the manual for clarity.
Procedures for safely opening the package and handling the gearmotor.
How to identify the specific product model and its details from the label.
Defines the proper applications and purpose of the gearmotor in automated gates.
Specifies operational boundaries, forces, and environmental constraints for safe use.
Instructions for safe operation during power failures or system faults.
Step-by-step guide to manually release and operate the gearmotor.
Detailed technical data including power, speed, force, and dimensions for different models.
Visual guide to all supplied and separately required components for installation.
List of tools necessary for performing the mechanical installation procedures.
Steps for correctly mounting the foundation plate before gearmotor installation.
Procedures for securely positioning and fixing the gearmotor unit to the base.
Detailed instructions for fitting either steel or nylon rack to the gate leaf.
Guide for installing an optional manual release lock with a unique key.
Identification of the main electronic board and its integrated components.
Steps for safely detaching the protective cover of the electronic board.
How to wire external control devices like buttons and photocells to the board.
Wiring instructions for accessories, limit switches, and Bus 2Easy devices.
Connecting and configuring outputs for indicator lights and alarms.
Steps for inserting and connecting radio receiver modules.
Initial steps for powering up the system and checking status LEDs.
Programming the correct opening and closing direction for the gate leaf.
Mounting and setting the limit switches for precise gate travel.
Automated process for the board to learn gate travel and parameters.
Setting parameters for pause times, force limits, and slowdowns.
Adjusting sensitivity for obstacle detection and impact force limitation.
Performing functional tests, force checks, and compliance documentation.
Securing the gearmotor cover and applying warning labels.
Connecting and configuring photocells for safety and automation logic.
Wiring and programming sensitive edges for obstacle detection.
Connecting and programming stop buttons and safety edge inputs.
Connecting and configuring Bus 2Easy compatible accessories like photocells and edges.
Connecting and configuring various output accessories for status indication and control.
Installing radio modules and memorizing radio controls for wireless operation.
Setting up primary and secondary boards for dual-leaf gate operation.
Understanding LED indicators for system status and troubleshooting.
Interpreting display codes that indicate the current state of the automation.
How to configure outputs for warning signals based on automation status.
Methods for viewing and diagnosing active error and alarm codes.
Routine checks and intervals for keeping the operator in optimal condition.
Procedure to reset the board to its default configuration and parameters.
Setting up notifications for scheduled maintenance based on cycle counts.
Reading and resetting the internal counters for operator usage cycles.
Loading a newer version of the electronic board firmware using a USB module.
Loading an older version of the electronic board firmware using a USB module.
Explanation of user commands and how detection devices affect operation.
Detailed breakdown of different operational modes and their behavior.
Procedures for handling emergencies and performing manual gate movement.
To Next Page
