FAAC 746 C - 4 Optional Equipment; Lock with Personalised Key

18
746 C - 844 C 22 532150 - Rev.A
3
4
8 24
1
2
5
24
Translation of the original instructions
ENGLISH
4. OPTIONAL EQUIPMENT
4.1 LOCK WITH PERSONALISED KEY
■ Remove the existing lock
1. Open the release lever using the key and then
remove the screw and the locking lever.
2. Remove the nut and the existing lock.
■ Install the new lock
3. Install the new lock and fasten it using the nut.
4. Insert the locking lever vertically and fasten it
using the screw.
Use the new key to make sure that the release lever
works.