1
746 C - 844 C 4 532150 - Rev.A
0123 0001
••••••
••••••
•••• ••••
••••••
••••
••
••••••
••••••
N
746 C Z16
* REFERS TO 230 V ~ - 50Hz
FAAC S.p.A. Soc. Unipersonale
Via Calari, 10 - 40069 Zola Predosa BOLOGNA
Italy
Italy
Cod. ... MMYY PROG
Translation of the original instructions
ENGLISH
2.2 PRODUCT IDENTIFICATION
The product is identified by the plate.
MARKINGS ON THE PRODUCT
Adhesive sign on the casing. It indicates the breather
screw that must be removed before start-up.
The adhesive sign must be placed on the casing by
the installer. It indicates the risk of trapping fingers /
hands due to the rotation of the pinion.
2.3 INTENDED USE
FAAC series 746 C - 844 C gearmotors have been
designed to control motorized horizontal movement
sliding gates intended for installation in areas that are
accessible to people, the main purpose of which is to
provide safe access for goods, vehicles and people to
industrial, commercial or residential buildings.
Only one gearmotor must be installed for each
leaf. The system requires a special foundation plate
(supplied separately) to be embedded in a plinth. The
gate must be moved via a drive pinion and a rack
(supplied separately).
To move the gate manually, follow the instructions in
section § Manual operation.
Any other use that is not expressly specified in these
instructions is prohibited and could affect the integrity
of the product and/or represent a source of danger.
Sale code
Product name
Month/year of production
Progressive number for the
month of production
Example:
IDENTIFICATION NUMBER
made in:
January 2024
progressive:
0001
To Next Page
Loading...
Need help?
General
