FAAC 746 C - Operating Logic Descriptions

746 C - 844 C 55 532150 - Rev.A
Translation of the original instructions
ENGLISH
■ C DEAD-MAN
This logic uses dead man commands OPEN A (OPEN) and OPEN B
(CLOSE). Partial motion is not available.
!
A maintained command must be activated intentionally
and the automation must be visible.
Maintained OPEN opens the automation.
Maintained CLOSE (OPEN B) closes the automation.
If the photocells are triggered, movement is stopped.
■
b SEMI-AUTOMATIC b
This logic uses the commands OPEN and OPEN B (CLOSE). Partial
motion is not available.
OPEN if the automation is closed, causes it to open.
OPEN during closing, causes it to reopen.
CLOSE (OPEN B) if the automation is open, it cause it to close, during
opening, has no effect.
If the photocells are triggered the direction of movement is
reversed.
■
bC MIXED (b during opening, C during closing)
This logic uses impulse commands OPEN A (OPEN) and dead-man
command OPEN B (CLOSE). Partial motion is not available.
!
A maintained command must be activated intentionally
and the automation must be visible.
OPEN opens the automation.
Maintained CLOSE (OPEN B) closes the automation. During
opening, a non-maintained CLOSE command stops the automation.
OPEN during closing, causes it to reopen.
The triggering of the closing photocells reverses the direction of
movement; during opening, it stops the movement.
■
Ar AUTOMATIC WITH EARLY CLOSING
This logic only uses the OPEN command.
OPEN if the automation is closed, causes it to open. The automation
closes automatically after the pause time has elapsed.
OPEN during the pause, resets the pause time.
OPEN during opening, is ignored.
OPEN during closing, causes it to reopen.
The triggering of the closing photocells during opening stops the
automation, when released the automation closes.
■
A AUTOMATIC
This logic only uses the OPEN command.
OPEN if the automation is closed, causes it to open. The automation
closes automatically after the pause time has elapsed.
OPEN during the pause, resets the pause time.
OPEN during opening, is ignored.
OPEN during closing, causes it to reopen.
The triggering of the closing photocells during pause, reloads
the pause time.
■
AP AUTOMATIC STEP-BY-STEP
This logic only uses the OPEN command.
OPEN if the automation is closed, causes it to open. The automation
closes automatically after the pause time has elapsed.
OPEN during the pause, stops the gate and the next OPEN command
closes it.
OPEN during opening, stops the gate and the next OPEN command
closes it.
OPEN during closing, causes it to reopen.
The triggering of the closing photocells during pause, reloads
the pause time.
■
S AUTOMATIC SAFETY
This logic only uses the OPEN command.
OPEN if the automation is closed, causes it to open. The automation
closes automatically after the pause time has elapsed.
OPEN during pause, causes it to close.
OPEN during opening, causes it to close.
OPEN during closing, causes it to reopen.
The triggering of the closing photocells when paused, closes the
gate - during opening, requests closing - during closing, causes
the gate to reverse and then closes it immediately.
■
A1
AUTOMATIC 1
This logic only uses the OPEN command.
OPEN if the automation is closed, causes it to open. The automation
closes automatically after the pause time has elapsed.
OPEN during the pause, resets the pause time.
OPEN during opening, is ignored.
OPEN during closing, causes it to reopen.
The triggering of the closing photocells when paused, closes the
gate - during opening, requests closing - during closing, causes
the gate to reverse and then closes it immediately.
■
SP AUTOMATIC STEP-BY-STEP SAFETY
This logic only uses the OPEN command.
OPEN if the automation is closed, causes it to open. The automation
closes automatically after the pause time has elapsed.
OPEN during pause, causes it to close.
OPEN during opening or closing, stops it and the next OPEN com-
mand reverses the direction.
The triggering of the closing photocells: during pause, closes the
gate - during opening, requests closing - during closing, causes
the gate to open and then closes it immediately.