9
b
a
d
f
g
ENGLISH
6 BLEEDING
Remove the screw in Fig. 24 ref.d from the front fitting
Remove the joint (Fig.24 ref.f) from the operator stem.
(Fig. 24 ref. g).
2.
3.
Loosen the tie-rods (Fig. 23 ref. a) and remove the metal
protective housing (Fig. 23 ref.
b).
1.
Remove the upper tie-rod and be careful with the
O-ring that must remain it its seat.
Remove all spacers, if present (Fig. 25).4.
Til t th e o p er ato r u p wa rd a s mu ch a s p o ss ibl e.
D o n o t f o r c e t h e r e a r f i t t i n g t o o m u c h .
5.
Supply the operator with power and move the stem
repeatedly, in and out, for all its stroke, until reaching a
smooth movement (Fig. 27).
After bleeding, repeat the operations described above in
reverse order.
6.
7.
TO PREVENT OIL LEAKAGE FROM THE
BREATHER HOLE, DO NOT TILT THE OPERATOR
DOWNWARD
Fig.23
Fig.24
Fig.26
Fig.25
Fig.27
To Next Page
Loading...
