To Next Page
K
kenSep 6, 2026
key programming C720-C721 replaced fob as original stolen. Now I need to set it up to open gate. How do I program it?
key programming C720-C721 replaced fob as original stolen. Now I need to set it up to open gate. How do I program it?
All safety instructions must be read and followed for safe operation and installation.
Essential checks before starting automation installation for safety and efficiency.
Instructions for assembling and positioning the foundation plate correctly.
Steps for physically mounting the gearmotor onto the foundation plate.
Procedures for attaching the drive rack to the gate.
Guidance on connecting the control board and associated wiring.
How to correctly position magnetic limit switch sensors for gate movement.
Instructions for installing the battery backup kit.
Instructions for installing the radio receiver module.
Essential safety rules for users to prevent accidents.
Overview of the C720/C721 automated systems and their operation.
How to manually release and operate the gate during power loss or malfunction.
Steps to re-engage the motor lock after manual operation.
General| Model | FAAC C721 |
|---|---|
| Category | Gate Opener |
| Max Gate Weight | 800 kg |
| Speed | 12 m/min |
| Operating Temperature | -20°C to +55°C |
| Protection Class | IP54 |
| Control Voltage | 24V DC |
| Power Supply | 230V AC |
| Power Consumption | 130W |
