FAAC TM2 X R MINI - TM2 X W Sensor; TM2 X W Sensor Setting Procedure; TM2 X W Sensor Deletion Procedure

TM2 X R MINI 31 A4518_6H82_Rev.A
COMPATIBLE DEVICES
I
For the complete description of the functions of this device see the instruction
booklet that came in the box.
It detects movements caused by the wind on the awning arms.
TM2 X W SENSOR
SETTING THE SENSOR
DELETING THE SENSOR
SELECTOR
LED
SET BUTTON
0
To associate the sensor to the control unit, a remote control must be already me-
morized. Set the selector to the 0 position and then perform this sequence:
To delete the sensor from the control unit, an already programmed remote control
must be used. Set the selector to the 0 position; if active wait for the sensor to go
off and then perform this sequence:
2 sec
set
+
A B
B
2 sec
set
+
A B
A
EN