FAAC TM2 X R MINI - Anemometers; Anemometer Sensor Setting; Anemometer Sensor Deletion

TM2 X R MINI 32 A4518_6H82_Rev.A
ANEMOMETERS
TM2 X SW
Sun-sensor
tuning
Set button
Wind-speed
tuning
set
SETTING
To associate the sensor to the control unit, a remote control must be already me-
morised. The setting sequence is the following:
DELETING
To delete the sensor from the control unit, an already programmed remote control
must be used. The deleting sequence is the following:
For the complete description of the functions of these devices see the instruction
booklet that came in the box.
2 sec
set
+
A B
B
2 sec
set
+
A B
A
EN