XKP W 11 532110 - Rev.A
3.10 SET THE XKP W SLAVE
This operation is irreversible and converts the XKP W, which is factory set to Master, into a Slave
device. A Slave XKP W can learn, but cannot teach a radio code.
When the XKP W is waiting for an operation, enter:
10 # 105 #
60 s
3.11 RANDOMISE THE RADIO CODES
This reassigns new radio codes to the XKP W for all radio channels. Once this has been done, the XKP W
keeps the settings and any user codes that were created, but in order for it to function, the XKP W has
to be stored again on all the radio receivers on which it has to operate.
When the XKP W is waiting for an operation, enter:
11 # 114 #
60 s
3.12 EASY OR ADVANCED OPERATION
It is only possible to carry out this operation if the user code memory is empty.
When the XKP W is waiting for an operation, enter:
12 # 0 # (enables Easy Operation)
or
12 # 1 # (enables Advanced Operation) 60 s
To Next Page
Loading...