Faber Flexa User Manual

15
GB
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm.
• When opening the sliding carriage for the first time after installing the hood, pull it out briskly until it
clicks.
USE
Control panel
L Light Switches the lighting system on
and off
L Light Switches the lighting system on
and off
M Motor Switches the extractor motor on
and off
M Motor Switches the extractor motor on
and off
V Speed Sets the operating speed of the
extractor:
1. Low speed, used for a
continuous and silent air
change in the presence of
light cooking vapour.
2. Medium speed, suitable for
most operating conditions
given the optimum treated air
flow/noise level ratio.
3. Maximum speed, used for
eliminating the highest
cooking vapour emission,
including long periods
V Speed Sets the operating speed of the
extractor:
Low speed, used for a continuous
and silent air change in the
presence of light cooking vapour.
Maximum speed, used for
eliminating the highest cooking
vapour emission, including long
periods
L
M-V
L
M - V
0
1
0
1
2
3

Faber Flexa Specifications

General

Mounting	Wall-mounted
Number of speeds	3
Number of lamps	2
Number of Motors	1
Lighting	Yes
Material	Stainless steel
Grease filter type	Aluminum
Airflow Capacity	620 m3/h