Faber Flexa - Odour Filters (Recirculation Version); Lighting

17
GB
Odour filters (Recirculation version)
REPLACING ACTIVATED CHARCOAL FILTERS
Lighting
LIGHT REPLACEMENT
• These filters are not washable and cannot be
regenerated, and must be replaced approximately
every four months of operation, or more
frequently with heavy usage.
• Remove the metal grease filters, or open the
filter retaining grill.
• Remove the saturated activated carbon filters by
releasing the fixing hooks.
• Fit the new filters by hooking them into their
seating.
• Replace the metal grease filters, or close the
filter retaining grill.
• 20 W halogen light.
• Remove the 2 Screws fixing the Lighting
support, and pull it out of from the Hood.
• Extract the Lamp from the Support.
• Replace with another of the same type, making
sure that the two pins are properly inserted in the
lamp holder socket holes.
• Replace the Support, fixing it in place with the
two Screws removed as above.
• 40 W incandescent light
• Remove the metal grease filters, or open the
filter retaining grill.
• Unscrew the bulbs and replace them with new
ones having the same characteristics.
• Replace the metal grease filters, or close the
filter retaining grill.