EasyManua.ls Logo

Faber FLEXA FLEX24SS300 User Manual

Faber FLEXA FLEX24SS300
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FLEX24SS300
FLEX30SS300
Installation Instructions
Use and Care Information
Instructions d'installation
Utilisez et d'entretien
Instrucciones de instalación
Información de uso y cuidado
FLEXA

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Faber FLEXA FLEX24SS300 and is the answer not in the manual?

Faber FLEXA FLEX24SS300 Specifications

General IconGeneral
TypeUnder Cabinet
Airflow300 CFM
LightingLED
MaterialStainless Steel
Number of Motors1
Venting TypeDucted
Width24 inches
Filter TypeMesh

Summary

IMPORTANT SAFETY INSTRUCTIONS

Range Top Grease Fire Warnings

Safety guidelines to prevent range top grease fires and injuries.

Electrical and Installation Safety

Warnings on electrical shock, grounding, and proper installation practices.

VENTING REQUIREMENTS

Ductwork and Installation Guidelines

Instructions for ductwork length, elbows, sealing, and material requirements for safe venting.

Cold Weather Installation

Recommendations for back draft dampers and thermal breaks in cold weather installations.

ELECTRICAL REQUIREMENTS

Grounding and Electrical Safety

Essential warnings and requirements for proper electrical grounding to prevent shock.

California Proposition 65 Warning

Information on chemicals known to cause cancer or reproductive harm in California.

RANGE HOOD DIMENSIONS (24-INCH)

RANGE HOOD DIMENSIONS (30-INCH)

INSTALLATION HEIGHT REQUIREMENTS

PARTS LIST

TOOLS NEEDED

VENTING METHOD OPTIONS

Option 1: Rear or Top Venting

Guidance for installing the range hood with rear or top ductwork ventilation.

Option 2: Recirculating Venting

Instructions for non-ducted recirculation, requiring an activated charcoal kit.

PREPARING THE CABINET FOR INSTALLATION

Attaching Hood to Cabinet Underside

Steps for directly mounting the hood or using wood blocks for recessed cabinets.

Cabinet Cut-Out Creation

Procedure for creating the necessary cut-out in the cabinet bottom for the range hood.

INSTALL THE REAR TRIM STRIP

ATTACH VENTING: OPTION 1 (REAR/TOP)

Install Damper Ring and Flaps

Steps to install the metal damper ring and damper flaps inside the hood top.

Connect Ductwork to Cap

Procedure for connecting the ductwork to the roof or wall cap and sealing.

ATTACH VENTING: OPTION 2 (RECIRCULATING)

Route Ductwork and Install Grill

How to route ductwork for recirculation and secure the vent grill with screws.

CONNECTING HOUSE POWER

Electrical Installation and Grounding

Instructions for connecting the power cord, grounding, and outlet requirements.

Custom Front Trim Adjustment

Guidance on adjusting or customizing the front trim panel of the range hood.

NON-DUCTED RECIRCULATION FILTER INSTALLATION

Charcoal Filter Installation

Steps for attaching and installing the activated charcoal filters on the blower.

Reinstall Grease Filters

Procedure for reinstalling the grease filters after servicing.

OPERATING THE CONTROLS

Best Results and Automatic Operation

Tips for optimal performance and details on automatic operation based on visor position.

Light Control (L)

Explanation of the on/off switch for the range hood light.

Motor Speed Control (M-V)

Guide to the motor speed control switch for low, medium, and high blower settings.

CLEANING STAINLESS STEEL

CARING FOR FILTERS

REPLACING THE ACTIVATED CHARCOAL FILTER

REPLACING BULBS

WIRING DIAGRAM

WARRANTY INFORMATION

Faber Consumer Warranty & Service

Details Faber's 1-year limited warranty, coverage, and how to obtain service.

Warranty Exclusions

List of conditions and circumstances not covered by the Faber warranty.

Related product manuals