EasyManua.ls Logo

Faber FLEXA FLEX24SS300 - Préparation de Larmoire

Faber FLEXA FLEX24SS300
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39
1
2
Vous pouvez installer la hotte directement sur le dessous de
l'armoire.
Si le fond de l'armoire est en retrait, vous devez installer des blocs de
bois pour assurer un alignement correct avec le fond de l'armoire.
Les blocs de bois doivent être alignés ou encastrés de 1/16pouces
à 1/8pouces dans le fond de l'armoire, comme illustré.








20 1/16"
9/16"
FIXATION DE LA HOTTE À L'ARMOIRE
PRÉPARATION DE L'ARMOIRE
Créez une découpe dans le fond de l'armoire comme indiqué sur
l'illustration.
3
HOTTE DE CUISINE 24POUCES
15
14
1
33
The Hood can be installed directly on the underside of the cabinet.
Create a cut out in the bottom of the cabinet as shown in the
illustration.








20 1/16"
9/16"
RANGE HOOD 24"








24"
9/16"
RANGE HOOD 30"
Remove the grease filters by pushing the release tab towards the
back of the hood.
44
SNAP-ON FITTING
bandes ltrantes en bois
HOTTE DE CUISINE 24POUCES

Table of Contents

Related product manuals