24
The Activated Charcoal Filters (FILTER7) are not washable and cannot be
regenerated, and must be replaced approximately every 4 months of operation,
or more frequently with heavy usage.
1. Pull out the sliding suction panel.
2. Remove the grease filters by pushing the release tab towards the
side of hood.
3. Remove the saturated carbon filter by releasing the fixing hooks.
4. Fit the new filter by hooking it into its seating.
5. Replace the filter, taking care to ensure that the handle faces forwards.
6. Close the sliding suction panel.
CAUTION: When used in recirculation mode, to Reduce the Risk of Fire
and Shock use only conversion kit Model FILTER7.
REPLACING THE ACTIVATED CHARCOAL FILTER
To Next Page
Loading...
Need help?
General
