EasyManuals Logo

Faber FLEXA FLEX24SS300 User Manual

Faber FLEXA FLEX24SS300
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
23
Cleaning Exterior surfaces:
Please note, abrasives and scouring agents can scratch range hood
nishes and should not be used to clean nished surfaces.
Stainless Steel nish cleaning instructions:
Clean exterior surfaces with a commercially available stainless steel
cleaner.
CLEANING STAINLESS STEEL
CARING FOR FILTERS
CLEANING METAL GREASE FILTERS
The metal grease lters can be cleaned in hot detergent solution or washed
in the dishwasher. They should be cleaned every 2 months use, or more fre-
quently if use is particularly heavy.
1. Pull out the sliding suction panel.
2. Remove the grease filters by pushing the release tab towards the
side of hood.
3. Wash the filter without bending it, leave it to dry thoroughly before
replacing (if the surface of the filter changes color over time, this
will have absolutely no effect on its efficiency).
4. Replace, taking care to ensure that the handle faces forward.
5. Cleaning in dishwasher may dull the finish of the metal grease filter.
6. Close the sliding suction panel.
7. Completely dry the filters before installing back into the hood. No
water should be trapped in the filter before reinstalling.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Faber FLEXA FLEX24SS300 and is the answer not in the manual?

Faber FLEXA FLEX24SS300 Specifications

General IconGeneral
BrandFaber
ModelFLEXA FLEX24SS300
CategoryVentilation Hood
LanguageEnglish

Related product manuals