Faber Flexa User Manual

16
GB
MAINTENANCE
Grease filters
CLEANING METAL SELF-SUPPORTING GREASE FILTERS
CLEANING MULTILAYER METAL GREASE FILTERS
REPLACING SYNTHETIC GREASE FILTER
• The filters must be cleaned every two months of
operation, or more frequently with heavy usage,
and can be washed in a dishwasher.
• Remove the filters one at a time, after
disconnecting the relative fastening elements.
• Wash the filters, taking care not to bend them.
Allow them to dry before refitting.
• When refitting the filters, make sure that the
handle is visible on the outside.
• The filters must be cleaned every two months of
operation, or more frequently with heavy usage,
and can be washed in a dishwasher.
• Release the filter retaining grill using the lateral
sliding handles.
• Remove the filter retaining clips.
• Remove and wash the filters. Allow them to dry
before refitting.
• Replace the filters on the grill, fix them in
position using the filter retaining clips and close
the filter retaining grill.
• The filter is not washable and cannot be
regenerated, and must be replaced approximately
every two months of use, or more frequently with
heavy usage.
• Release the filter holder frame using the lateral
sliding handles.
• Remove the fIlter retaining clips.
• Replace the saturated synthetic filter.
• Fix the new synthetic filter using the retaining
clips and close the filter holder frame.

Faber Flexa Specifications

General

Mounting	Wall-mounted
Number of speeds	3
Number of lamps	2
Number of Motors	1
Lighting	Yes
Material	Stainless steel
Grease filter type	Aluminum
Airflow Capacity	620 m3/h