Facina_VKPCCTV_Instructions_Rev01
13
• Make sure camera is in the OFF position
• Insert the jack plug of external AC/DC power adaptor or
battery pack into the DC 12V port at the bottom of
camera housing
• Sliding the switch to TEST or A or B or CAM from OFF
Memory Options
The camera is also equipped with an expandable media card slot
capable of accepting from 2GB up to 32GB SD card with Class 10
or below speed rating (sold separately). The status display will
show the number of images stored on the SD card. If no SD card
is inserted the status display will show “NOSd”.
And once the memory is full, the camera will overwrite the
memory to keep the last image and delete the first image from
the memory.
Inserting SD memory card
• Note: Please ensure the camera is switched off while
inserting or removing the SD card. Open the cover, and
insert SD memory card in to the SD card slot completely
and in the correct direction as shown on the top of SD
card slot.
• To remove the SD memory card, depress the SD card and
pull out the card gently (ensure the switch is in the off
position)
• SD cards must be empty (i.e. blank). If you are using the
SD card from other cameras, please make sure to format
the SD card in your computer prior to use in this camera.
To Next Page
Loading...