Press on/o button to turn o the appliance. Close water supply tap and open the dishwasher
door. Wait a few minutes before unloading the dishwasher. Allow dishes to cool. Hot dishes
are more susceptible to breakage. Also the dishes will dry.
Turn o the dishwasher
The programme is completed only when the programme indicator is on, but not ashing.
1. Press on/o button to turn o the appliance.
2. Close water supply tap!
Open the door carefully.
Hot dishes are more susceptible to breakage. Before unloading the dishwasher leave the
dishes to cool for about 15 minutes.
Open the dishwasher door, leave it ajar and wait a few minutes before removing the dishes.
This will allow the dishes to cool and dry.
Unload the dishwasher
It is normal that the dishwasher interior is wet.
First remove dishes from the lower basket and then from the upper basket. This will prevent
water dripping from the upper basket on the dishes in the lower basket.
4
To Next Page
Loading...
