INSTALL THE APPLIANCE IN
A CABINET
1
Position the appliance in the desired location. The back should rest against the wall
behind it, and the sides, along the adjacent cabinets or walls. The dishwasher is
equipped with water supply and drain hoses that can be positioned either to the right
or the left sides to facilitate proper installation.
Levelling the appliance
Once the appliance is positioned for levelling, the height of the dishwasher may be altered
via adjustment of the screwing level of the feet.
Only apply to the free standing dishwasher.
Free Standing Installation
Fitting between existing carbinets
The height of the dishwasher, 845 mm, has been designed in order to allow the machine
to be tted between existing cabinets of the same height in modern tted kitchens. The
feet can be adjusted so that correct height is reached. The laminated top of the machine
does not require any particular care since it is heatproof, scratchproof and stainproof.
To Next Page
Loading...
