1.7.2.1 Time
Press the key to activate the option to display / hide the time. By default it is enabled.
1.7.2.2 Laundry weight
Press the key to activate the option to display the weight of the laundry. If this option is
disabled, the weight icon is not displayed. By default it is disabled.
1.7.2.3 Instant programming
Press the key to enable / disable instant programming. If instant programming is disabled,
the parameters for each cycle can be viewed but cannot be edited. By default it is enabled.
Press to return to the initial configuration screen.
1.7.3 Run screen
On the HUD configuration menu screen, in the OPL configuration, these are the parameters of
the run screen that can be configured, by pressing the key.
1.7.3.1 Stop button, STOP
Press the key to hide the stop button so that the user cannot stop the programme. By
default this is enabled.
1.7.3.2 Remaining time
To Next Page
Loading...
Need help?
General
