Press the key to activate / deactivate the option to display/hide the total time remaining and
the programme progress indicator on the run screen. By default it is enabled.
1.7.3.3 PAUSE button
Press the key to hide the pause button so that the user cannot interrupt the programme. By
default this is enabled.
1.7.3.4 Menu button
Press the key to display /hide the run menu icon. By default it is enabled.
1.7.3.5 Time
Press the key to activate the option to display / hide the time. By default it is enabled.
1.7.3.6 Advance button
Press the key to hide the advance button, so that it is not possible to change from one cycle
to the next while a programme is running. By default it is enabled.
Press to return to the initial configuration screen.
1.8 Automatic shutdown
On the HUD configuration menu screen, in the OPL configuration, press the key to
enable/disable the automatic shutdown option. If this option is activated and the programmer is on the
main screen, the machine will switch to the Off screen after 30 minutes of inactivity. By default it is
enabled.
1.9 Energy saving
Press the key to activate the energy saving option, which saves energy by switching off the
screen 10 minutes after the machine has been switched off.
If any part of the screen is touched, the backlight will light up again. Likewise, if the ON/OFF
button is pressed, the backlight comes on and the main screen is opened. By default it is enabled.
1.10 Promotional video
Pressing the option to activate a promotional video is accessed on the computer screen.
To Next Page
Loading...
