EN
13
4/USING YOUR APPLIANCE
After connecting your appliance or after a prolonged power failure, the clock displays
11 22 :: 00 00
,
the display is blinking.
To set the clock Display
Press the + / - keys to set the time, ex. 12:15.
Confirm by pressing the start key
.
Your clock is set.
When there is a time change Display
Press the + AND - keys at the same time. The time display blinks.
Press the + / - keys to set the time, for example 12:15.
Confirm
by pressing the start key
.
Your clock is set.
Comments:
If you do not press the clock set key, the time displayed is automatically recorded after
one minute.
Your appliance is equipped with a back-up so that during a power failure the time
remains displayed.
You can programme "CHILD SAFETY" to block unauthorised use of your microwave oven.
Setting:
Press the
start key
for 5 seconds with the door open,
the key symbol lights up.
The procedure is confirmed by a beep.
To cancel:
Follow the same procedure: press the
start key
key for 5 seconds
with the door open.
The key symbol switches off. The procedure is confirmed by a beep.
•HOW TO SET AND CHANGE THE TIME
•CHILD SAFETY
12:15
12:15
6:30