49
11. LOCATING AND TROUBLESHOOTING
PROBLEMS
There may be small anomalies that do not necessarily mean a product has failed and
so do not require a Technical Service call-out.
These small anomalies are often easy to correct. To avoid calling out a Service
Engineer unnecessarily, check to see if the failure you have encountered is included
in the table below:
If your oven is still not working correctly after checking the points indicated in the
table, call the Technical Service department indicating the type of failure, the
appliance model, the product number and the serial number indicated on the
features identification plate. This plate is on the lower front face of the oven cavity.
Any repairs necessary must be carried out by Service Engineers from an Official
Technical Service. Any repairs effected improperly or incorrectly might give rise to
serious risks for users. To resolve a doubt, make a query, or lodge a complaint in
connection with the guarantee or report a failure of your oven, contact FAGOR on our
web site: www.fagor.com.
To Next Page
Loading...
