35
EN
Filter Selection
Small size lter for small size coffee
Large lter for large coffee
E.S.E lter for E.S.E Pod coffee
Relling Coffee to Filter
Following the directions in the following gures;
a. Select the desired lter and place the lter in the lter holder. Fill the lter well enough
with fresh, nely ground espresso coffee. (Do not overll).
b. Tighten the coffee with the back of the scale spoon.
c. Remove the excess coffee.
NOTE!
Before lling the lter with ground coffee for more delicious coffee, make sure the lter is
not dirty with the coffee residue left from the previous brew.
NOTE!
If you are going to use E.S.E Pod, select the E.S.E Pod lter and insert the E.S.E Pod
lter into the lter holder chamber.
Suggestion
For a good Espresso, place the lter and coffee in the lter holder. Apply a pressure of 15
kg to ensure that it is on the same level with the tamper. Then remove the excess coffee
by hand again. Allow too little water pour from your machine. Insert the lter holder into
the appliance and press the button to stop the water and stop again by pressing the same
button. This way you will heat the lter holder before a hand. Then place the cup and make
your coffee.