Fakir BABILA - Placing the Filter Holder on the Appliance; Removal of Used Coffee from the Filter Holder

36
EN
Placing the Filter Holder on the Appliance
a. Place the lter holder under the brewing head.
b. Make sure that it is aligned with the
open lock icon.
c. Then, slowly turn it to the right until it is aligned with the
closed lock icon and put it
into place.
Danger of Burn!
In order to prevent splashes, never remove the lter holder while the machine is running.
Removal of Used Coffee from the Filter Holder
a. Remove the lter holder from the appliance.
b. Push and hold the lter holder and attach it to the lter.
c. Remove the used coffee from the lter by inverting the lter holder and supporting it with
your nger.
Danger of Burn!
Be careful while removing the lter. Do not touch with your hand because it will be very
hot immediately after use.
Placing Cup / Mug on Appliance
You must adjust the cup installation grid according to the size of the cup / mug you will use.
If you are going to use a small cup, turn it over like the markings on the cup installation
grid. That way, you will be raising the size of the cup.