The Falcon GSM is a highly-featured GSM-based unit which is
used for the secure transmission of alarm signals to a control
room.
The Falcon GSM will communicate via GSM messages to the
control room and includes the universal Contact ID interface to
alarm panels as well as a serial interface to leading panels. It
also has seven dry contact input triggers.
In addition, the Falcon GSM has two dry-contact relay outputs
which can be used to command alarm panels and other devices.
These outputs can also be controlled via the MiFalcon mobile
application.
1. INTRODUCTION
Falcon GSM Installation and Operation Manual I
5
GSM
To Next Page
Loading...
