4
FLAMMABLE HAZARD: This symbol indicates the
products used are flammable.
CAUTION OR WARNING SYMBOL: This symbol
indicates a general warning or caution. A caution is
important for protecting the equipment and performance.
A warning is important to protecting yourself, others, and
the equipment.
Falex 400 General Safety Warnings
Fuels and solvents are flammable and may cause irri-
tation to the eyes or skin. Wear protective goggles and
gloves; avoid contact with skin, eyes, and clothing. Use in
well ventilated areas and keep away from heat or flame.
Follow all Material Safety Data Sheet (MSDS), Hazard-
ous Materials Identification System (HMIS), ISO 9000,
Lab Standard Operating Procedures (SOP), and related
instructions. Failure to comply may result in personnel
injury or death.
Desiccant may cause irritation to the eyes or skin. Wear
protective goggles and gloves; avoid contact with skin,
eyes, and clothing. Use in well ventilated areas and keep
away from heat or flame. Follow all Material Safety Data
Sheet (MSDS), Hazardous Materials Identification Sys-
tem (HMIS), ISO 9000, Lab Standard Operating Proce-
dures (SOP), and related instructions. Failure to comply
may result in personnel injury or death.
The heater tube test section can reach high
temperatures of 180– 380 °C during a test based upon
test configuration. Always place bus bar cover over
the heater tube test area when running test to prevent
contact with the test section. When the bus bar cover is
removed, always assume the heater tube test section is
hot and use caution when operating around this area.
Forward: Instructions–How to Use This Manual
To Next Page
Loading...